How to find out where the pipes built into the bathroom walls go?

plumbing


Anyone who has ventured to make a simple hole in the bathroom wall knows well the risk they run. Without proper care, it can cause enormous damage to the environment and recovery will be quite laborious. Here are some tips on how to avoid this disorder:

1 – Always have the Hydraulic plant close by:

Analyze the plant before any intervention in the environment. See where the tubes go and calculate a safety margin.

2 – Pay attention to water inlets and sewage outlets:

Tubes are usually routed vertically or horizontally. Although this is not a rule, avoid holes perpendicular to the outlets.

3- Use technology

Currently there are equipment that detect the tubes inside the wall with a certain precision, they are called electronic detectors of Pipes or wall scanners. They are affordable equipment that can help with this task.

In more complex cases, thermography equipment can be used to identify tubes and even leaks. However, these equipment are more expensive and often need a specialized professional to operate.

How to clean bathroom drains:


To solve the problem of bad smell in your bathroom drain, there are some homemade recipes to help you: you will need a glass of water, a glass of white vinegar and five tablespoons of baking soda.

After separating the ingredients, check out the step by step here:

  • Put the vinegar and water in a pan and wait for it to boil;
  • Put five tablespoons of baking soda down the bathroom drain;
  • When the water mixture boils, turn off the heat and pour it down the drain;
  • As soon as you pour the water, it will form a foam, which will eliminate the layer of fat present in the pipes, ending the bad smell of the bathroom.

If after following the steps and the bad smell persists, contact a specialized plumber.

How much does it cost to make bathroom plumbing?
The average price for plumbing bathroom water is $500.00.

As for labor, a plumber’s daily rate can cost an average of $280.00, and for smaller services plumbers can charge by the hour. The average hourly rate is 70.00.

For the repairs of leaking pipes inside the wall, it is on average $ 350.00. It can always vary according to the values ​​​​of the materials needed.

Where to find a Plumber:


There are several ways to find a service provider. The most reliable is to ask for a referral from someone you know. But there is a more practical way these days, which is on the internet. There are several sites that advertise this type of service… Give preference to time of service, recommendations from other customers, tools in good condition and updated, care with personal safety and finally with good technical knowledge, as well as practical.

We has been providing high quality products at a differentiated price and service. There are more than 7,000 items at your disposal to renovate, build or carry out that little maintenance that your environment needs. They are products for Construction, Electrical Materials, Hydraulics, Hardware, Tools, Painting, Utensils and Cleaning Products. Our team is prepared and oriented to help you in whatever is necessary for the success of your work. We look forward to your visit!

By aamritri

Leave a Reply

Your email address will not be published.

Related Posts

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.